Sonic SCS-60, Руководство по эксплуатации

Страница: 14 / 94

1-2
(Note)
If you cut the power switch without storing the transducer, the storage
operation of the transducer is automatically performed by the "Automatic
ascending operation." After storing the transducer up to the upper limit,
the power supply is automatically shut off. In addition, when cutting the
power supply for safety, cut the power supply after storing the transducer.
1.2.2 Descent and ascent of the transducer
(1) Projecting the transducer
Press the descending key ( ) of the controller to lower the transducer.
During the descent operation of the transducer, the upper lamp of the descending
key ( ) flashes on and off. Also, during the descent operation, "
↓
" is displayed
at the left of the hoisting amount indication.
When the operation is performed up to the lower limit, the hoisting amount
indication is displayed as being completely filled and the upper lamp of the
descending key ( ) is turned on. Further, the lower limit message is displayed
on the screen.
When the hoisting amount has reached the lower limit, the transmission is
automatically stopped by the operation of "AUTO TX" (effective when "TX" in
"MENU" is set to "AUTO").
(2) Storing the transducer
Press the ascending key ( ) of the controller to store the transducer.
During the ascent operation of the transducer, the upper lamp of the ascending
key ( ) flashes on and off. Also, during the ascent operation of the transducer,
"
↑
" is displayed at the left of the hoisting amount indication.
When the operation is performed up to the upper limit, the hoisting amount
indication is displayed as being completely empty and the upper lamp of the
ascending key ( ) is turned on. Further, the upper limit message is displayed on
the screen.
When the hoisting amount has not yet reached the lower limit, the transmission is
automatically stopped by the operation of "AUTO TX" (effective when "TX" in
"MENU" is set to "AUTO").