LKZ-720 OPERATING MANUAL version 1.02
50
3
Approach the receiver to the tested object in
order to determine whether it is a source of
alternating electric field.
Fig. 32
5.9 Multi-transmitter operation
LKZ enables operation work with four transmitters at the same time. Each transmitter must be
synchronized with the receiver and have a specific code of the transmitted signal set to uniquely iden-
tify the transmitter (A, B, C, D). When it is necessary, the synchronization of transmitters with the re-
ceiver is carried out in accordance with sec 3.3.
The multi-transmitter operation of the system enables precise location of breaks in an electric sys-
tem and identify individual cores in the cable.
5.9.1 Multi-transmitter operation – locating breaks
The transmitters should be connected to two ends of an open circuit. Each of the transmitters
should be assigned with a specific code of the transmitted signal and the voltage mode set for the
transmitted signal. The place of detected break will be indicated on the receiver by changes in the re-
ceived signal code.
Fig. 33 Locating breaks – multi-transmitter mode.
The procedure of detecting a break in an open circuit for two transmitters synchronized with the re-
ceiver (synchronization sec. 3.3).
No.
Operation
Screen
0
Make sure that the tested circuit is not
energized. It is essential to remove the
voltage source from the circuit.
Transmitter 1:
1
Turn the transmitter ON.
2
Connect the banana socket to the end of
tested circuit.
Fig. 33
3
Connect the second banana socket of the
transmitter to grounding.
Fig. 33
Code
Code
Содержание LKG-720
