LKZ-720 OPERATING MANUAL version 1.02
13
7
Code of the transmitted sig-
nal.
14
Detecting high voltage in the
traced object.
8
Recommended position in re-
lation to the traced object.
15
Relative indication of the received
signal.
2.2.3 Operation
2.2.3.1 Switching the receiver ON.
Press
ON/OFF
button. The test screen will be displayed with software version of the re-
ceiver.
2.2.3.2 Switching the receiver OFF.
Press
ON/OFF
button and hold it until the display shows
OFF
.
2.2.3.3 Selecting the operating mode of the receiver.
Select the operating mode of the receiver by pressing sequentially
MODE
button.
a) Operating mode
Detection of the magnetic field of traced signal. A signal from a synchronized transmitter is re-
quired. In this mode, two methods may be used for tracing the object.
The method is selected by using
3D/2D
button.
•
Method 2D
Pictogram
shows the received signal strength. In this mode, search for the strongest
signal level and after locating the object, you can switch to 3D method.
•
Method 3D
It is indicated on the display by pictogram
of the recommended position in relation to
the traced object.
Pictogram
indicates the position of the object in relation to the antenna.
Pictograms , ,
,
,
,
indicate the location of the transmitter.
b) Operating mode
Detection of the magnetic field of traced signal. A signal from a synchronized transmitter is re-
quired. In this mode, similarly to the previous one, two methods may be used for tracing the object
- 3D/2D.
This mode differs from the previous one: in 3D method the receiver must be held in parallel to the
traced conductor
- not in perpendicular
. This facilitates locating conductors and ca-
bles installed in the ground.
c) Operating mode
Detection of the electric field of traced signal. A signal from a synchronized transmitter is required.
Содержание LKG-720
