31
Stop recording
Tap to stop the recording
Bluetooth on/off
This setting only applies during the measurement mode. Bluetooth is always active before the
measurement. If Bluetooth is active, you can connect to a PC or tablet to review the recording
data in real-time.
Sound on / off
This setting only applies during the measurement mode. If the sound function is switched on,
an alarm sound will be given during the measurement when a sensor is removed. This function
might be useful for ambulatory measurements. The patient will be warned when a sensor has
been disconnected or removed. Inform the patients beforehand so that they are aware of this.
Patient markers/event markers
Patient and event markers can be set when the device is in measuring mode.
If the display is switched off, tap on the power (1) button and unlock the screen. Tap on the
patient marker icon and select a marker from the displayed list to assign an event. If a specific
marker is not selected,
only a “patient marker” will be set.
Initialization of a measurement
A measurement can be initialized via the DOMINO software or directly at the device.
Initialization via DOMINO software
When initializing a measurement via the DOMINO software you can enter the
patient’s name,
ID and further information such as date of birth, height and weight. This data is saved together
with the measurement.
The device can be programmed for manual or automatic start. When programmed for
automatic start the device enters wait mode after initialization. It starts at the programmed time.
When programmed for manual start, the recording must be started on device.
4.3.1.1
Pre-programmed automatic or manual start
Place the device into the docking station to initialize a measurement via the software (for
transfer see chapter 4.7).