SOLZAIMA K100, Инструкция по эксплуатации

Страница: 85 / 184

80
holes of the back (Figure 38) and join them with two screws A (DIN 912 M5x12) and
two nuts B (Nuts M5 DIN 6923).
Figure 38 - Joining the front grille with the top backtrack
e) Subsequently, fit the assembly to the equipment, using four screws
A (DIN 912
M5x12) as shown in Figure 39.
Figure 39 - Front grille assembly
f) Then, pull the registry bar forward (Figure 40-a), match the hole of the shaft and the
hole of the blade and join them with a screw E (DIN 912 M6x14) or screw (ISO 3780
M8 X12). If using the first screw, use a nut D (Nuts M6 DIN 6923) as shown in Figure
40-b.
2º (Olive)
2º (Olive)
2º (Olive)
A
A
B
B
A
A
A
A