SOLZAIMA K100, Инструкция по эксплуатации

Страница: 156 / 184

151
professional, industrial or intensive use of all products installed in industrial spaces,
commercial, or whose use exceeds 1500 hours per calendar year;
3.2 A functional test of the product must be performed before finishing the installation
(plaster, masonry, coatings, and paintings, among others);
3.3 No equipment can be replaced after the 1st Burn without the express authorization
of the producer;
3.4 Any product must be repaired on the site of installation without causing serious
inconvenience to the parties, save, if this proves impossible, or disproportionate;
3.5 In order to exercise its rights, and provided that the term indicated in 3.1 is not
exceeded, the Buyer must report in writing to Solzaima, S.A., the lack of conformity of
the Product within a maximum period of:
3.5.1 60 (sixty) days after the date on which it has detected it in the case of
domestic use of the product;
3.5.2 Thirty (30) days from the date of its detection, in the case of professional
use of the Product.
3.6 In the pellet range equipment’s, the commissioning service is required to activate
the warranty. It must be registered up to 3 months after the date of invoice, or, 100
hours of work of the product (whichever occurs first);
3.7 During the Warranty period referred to in paragraph 3.1 (and for this to remain
valid), repairs to the Product must be performed exclusively by the Official Technical
Services of the Brand. All services provided under this Guarantee will be performed
Monday through Friday within the working time and calendar legally established in each
region.
3.8 All requests for assistance must be submitted to the Solzaima, S.A. Customer
support service, by means of a proper form present on the Website
www.solzaima.co.uk, or, e-mail: support.cliente@solzaima.pt. At the time of the
technical assistance to the Product, the Buyer must present, as proof of the Product
Warranty, the purchase invoice of the same or another document demonstrating its
acquisition. In any case, the document proving the acquisition of the Product must