Solwise 3G11nMRW Скачать руководство пользователя страница 39

Страница: 39 / 257

Version 1.0.15

Click on

Next

button to go on next setting page.

4.2.3.7

WAN Access Type – PPTP

This option is typically used for DSL services. Some DSL service providers supply a special

DSL modem. This kind of modem only supports the PPTP tunnel to access the Internet, you

should create a PPTP tunnel that carries a PPP session and terminates on the DSL model.

Once the tunnel has been established, this kind of DSL modem will forward the PPP session

to the ISP. As long as the PPP session is connected, all the local users will be able to share

this PPP session to access to the Internet.

Apply 3G or 3.5G transmission rate for the backup. Once Dynamic IP connection is

disconnected, the system automatically connects Internet via 3.5G adapter. If 3.5G signal is

not available, it starts to search downward for 3/2.75/2.5G signals until none existed.

Setting up the interval time to auto detect whether the Internet connection is lost or not. If yes,

the system immediately switches to 3.5G Internet connection and will not switch back to the

original PPTP connection.

Содержание 3G11nMRW


































































































































































































































































Результаты поиска

Содержание 3G11nMRW

Отзывы:

Solwise 3G11nMRW, Руководство пользователя, Страница: 39 / 257

Результаты поиска

Содержание 3G11nMRW

Отзывы: