Solwave 180MW1000D, Руководство пользователя

Страница: 34 / 46

5
USER MANUAL
ELECTRIC SHOCK HAZARD:
• Plug unit into a properly grounded electrical receptacle of the correct voltage, size, and plug configuration. If
plug and receptacle do not match, contact a qualified electrician to determine and install proper voltage and size
electrical receptacle.
• Built-in units must be installed by a qualified electrician. Installation must conform to all local electrical codes.
Installation by unqualified personnel will void unit warranty and may lead to electric shock or burn, as well as
damage to unit and/or its surroundings.
• Turn OFF power switch, unplug power cord/turn off power at circuit breaker, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
• DO NOT submerge or saturate with water. Unit is not waterproof. Do not operate if unit has been submerged or
saturated with water.
• Unit is not weatherproof. Locate unit indoors where ambient air temperature is a minimum of 70°F (21°C).
• Do not clean unit when it is energized or hot.
• Do not steam clean or use excessive water on the unit.
• This unit is not “jet-proof” construction. Do not use jetclean spray to clean this unit.
• Do not pull unit by power cord.
• Discontinue use if power cord is frayed or worn.
• Do not allow liquids to spill into the unit.
• This unit must be serviced by qualified personnel only. Service by unqualified personnel may lead to electric
shock or burn.
FIRE HAZARD:
• Locate unit a minimum of 1" (25 mm) from combustible walls and materials. If safe distances are not maintained,
discoloration or combustion could occur.
• Do not use harsh chemicals such as bleach (or cleaners containing bleach), oven cleaners, or flammable cleaning
solutions to clean this unit.
BURN HAZARD:
• Some exterior surfaces on unit will get hot. Use caution when touching these areas.
• Use caution when opening drawer. Hot air escapes when drawer is open.