18
SECTION 2: INSTALLATION AND SETUP
2. Click
Create RAID Array
then confirm your selection. Allow the operation to complete, then follow the on-screen prompts
to continue.
3. Complete the device setup in the Configuration Guide (see “2.3 Configuration Guide utility” on page 13), then add cameras to
your system (see “2.5 Adding cameras to the system” on page 18).
2.5 Adding cameras to the system
Cameras can be added to the NVR in two ways:
•
Add Manually
method: A method for adding cameras that are on the same subnet as the NVR or a subnet different.
•
Discover
method: An automated method for adding cameras that are on the same subnet as the NVR.
Add Manually method
1. After logging into the NVR as an administrator, click the
Settings
option in the header of the screen.
2. In the right pane, click the
Add New
button to open the drop down list, then click
Add Manually
.
3. In the menu that opens in the right pane, enter the following:
a.
Address
. Enter the IP address of the device you want to add.
PRELIMINARY
Содержание SLS-ENVR Series
Страница 6: ...vi NOTES PRELIMINARY...
