Solstice SLS-ENVR Series, Руководство пользователя

Страница: 18 / 71

12
SECTION 2: INSTALLATION AND SETUP
8. Double-click the line for your NVR in the Discover window. Depending on the state of the NVR, one of the following screens
will result:
a. If the NVR is new (started for the first time) or just started after a factory reset procedure, the Configuration Guide utility
will open. See “2.4 Configuration utility” on page 15 to continue.
b. If the Configuration utility was used and the NVR was not previously reset to the factory default configuration, an NVR
web interface login window will open. Login to your NVR. The default values for
Username
and
Password
are
admin
and
admin.
After logging into your NVR, one of three screens will open, depending on the status of your NVR. Continue with the appropriate
procedure:
—
If the NVR is started for the first time after receiving if from your distributor, or a factory reset occurred previously, the
Configuration utility will open. Continue with “2.3 Configuration Guide utility” on page 13.
Or
—
If the NVR is started for the first time after a new (un-configured) HDD was installed, the RAID Array Configuration utility
will open. See “2.4 RAID Array Configuration utility” on page 17.
Or
—
If the NVR is started after it was pre-configured, and the two conditions above don’t apply, the SLS-ENVR web interface
Video window will open.
PRELIMINARY