If CUE is pressed in several channels, the signals
are added. Rotary CUE level controls the volume in
loudspeaker CUE.
Additionally, signal CUE is sent to the control room
headphones. In this way the operator can check the
channels using headphones.
3.3.3 Talk-back
The talk-back circuit allows the operator to talk with
the speaker while he is into the studio.
In order to talk, press the Talk-back button (see mo-
nitor panel drawing)
.
The
Control Room monitors
will be muted, to avoid feedbacks loops. Your voice
will be listened inside the Studio, by the left channel.
The right channel stays with the on-air audio, so that
speakers and journalists do not lose the On-Air refe-
rence. At the same time talk-back microphone will be
listen in all studio headphones.
The operator can press CUE in a microphone chan-
nel to engage in a dialog with the Studio.
The level of the talk-back microphone comes calibrated from
factory, and usually it is not necessary to modify it. If you
need to change it, there is a preset called “LEVEL” to make
the adjustment.
Page 20
D·816
broadcast console
SOLIDYNE
Содержание D 816
