Solgaz SI-4T-Black Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 23

Solgaz SI-4T-Black Скачать руководство пользователя страница 9

9

!!!!

Prohibited !

–

localization of induction cooktop over the oven without ventilation.

6.2

Connecting the induction cooktop to the electrical system

ATTENTION!

Connections of induction cooktop to electrical system (wiring system) may make only a person
with the appropriate authorizations. Any changes and modifications in electrical installations arestrictly
prohibited.

Information for the electrical installer (electric fitter) of induction cooktop

Feeder cable of induction cooktop has the ability to select the proper connection, for the different types of
power supply.
Using wire, are available the following connections:
- single-phase 230 V~
- diphase 400V~

ATTENTION!

Protective (earth) conductor (PE conductor) marked

, one should obligatorily connect. Electrical

installation powering the induction cooktop, must correspond to the consumption of electricity. Must have
an  adequate  cross-section  of  the  wires  and  should  be  equipped  with  properly  matched  protection  and
switch of feeder of induction cooktop.
This information is provided in the rating plate and electrical diagram to connecting the power cord.

ATTENTION!

Electrical installer, who connects induction cooktop must issue, located in the warranty card „certificate of

connecting the electric stove to the ele

ctrical system”.

Induction cooktop must be connected according to the scheme, otherwise it can be damaged.

«
...
7
8
9
10
11
...
»

Содержание SI-4T-Black
























Отзывы:

Нет отзывов