18
Activation of option ”maintenance of the heat”, is done by first switching on the sensor
or
(8), and
in the next step - sensor (2).
Switching off the function of the maintenance of the heat is executed by activation of cooking zone with
sensor 2, by switching on the sensor - Slider (3) and power level setting for the selected cooking zone
.
The marker ”H”
- residual heating
T
he appearance of a symbol ”H”, after switching
the induction cooktop off means that cooking
zone is still hot.
!
During the displaying the ”H”
marker (tag), do not touch the accompanying it cooking zone and do not
put items on it that are thermally sensitive. This may cause burns or destruction.
After switching off the symbol with ”H”, given cooking zone is still hot, but you can touch.
! In th
e event of a power failure, the marker ”H” is not lit.
The limitation of working time
Table No. 3
MAX OPERATING
(working) TIME OF
COOKING ZONE [h]
POWER LEVEL
8
1-3
4
4-6
Each cooking zone, depending on last set heating
power, has an assigned
the maximum working time.
If the heating power during cooking, for a longer
period (according to Table No. 3) will not be corrected,
then the cooking zone will turn off automatically. On
the panel will shine the symbol of residual heating
assigned for given cooking zone, up to the moment of
cooling off.
During this time, you can start and operate the induction cooktop. This function provides greater reliability
and safety during cooking.
Clock
(timer) function facilitates the cooking process, by being able to set the operating time of individual
cooking zones. This function can only be activated for burners, which are working. The clock has the ability
to acting/operation for all cooking zones simultaneously, independently and operates in the range of 1-99
minutes. You can use it as a kitchen timer.
Programming of work of cooking zone for a limited period
–
for this purpose, one should select the
cooking zone, and with slider set the power in the range of 1-9, the display will show a blinking value of set
power. Within 10 seconds one should press the marker/tag of the clock/timer (8). Will indicate the number