21
Maintenance of the induction cooktop
in good condition is a care of its cleanliness and preservation, but
also:
•
periodic inspections of the parts responsible for operation of induction cooktop and other working
elements. Inspection of induction cooktop should be held min. every two years after the expiration
of the warranty period, at the point of service.
•
regular maintenance of operating parts
Attention!!!
If the control panel does not react on given tasks in a proper manner, when enabled induction cooktop, one
should switch off the power supply using the main switch or fuses and one should report to the service
point.
Attention!
In case of the necessity of additional adjustment or introducing corrections, please contact the
service or a person with appropriate permissions.
PROCEDURE IN THE EVENT OF A FAULT
In the event of a fault:
•
Turn off induction cooktop
•
Cut off the power supply
•
Report to service
•
In case of minor problems, before contacting the service, You will need to check induction cooktop
autonomously, in accordance with guidelines in the table below:
DIFFICULTY
REASON
REACTION
1.
Induction cooktop does
not start
-
lack of voltage in the
electrical installation
-
check the operation of the fuse, if
a fuse has blown, replace it with a
new
2. Absence of response on
a set program
- induction cooktop turned off
-
launch induction cooktop
- too short time of switching on
-
when you turn on, hold the finger
a little longer, min. 1 second.
-
pressing multiple buttons at
once
-
press only one button at the same
time
3.
Induction cooktop does
not perform of preset
functions, it emits only a
short beep
-
active is function the "key"
-
deactivate function the "key"
4.
Lack of response of
induction cooktop
-
errors in the use - have
been used inappropriate
sensors or in too short time
-
once again, turn on induction
cooktop
-
sensors were dirtied or
covered
-
wash or discover sensors