Solgaz SI-4T-Black, Инструкция по эксплуатации и сборке, Страница: 16 / 23

16
Induction cooktop can be locked at any time, regardless of whether it is enabled or not. One should then
hold the button of the blockade – ie. the key (5) to the appearance of the sound signal, and on the clock
(timer) - within 1 minute - will light up the sign ”Lo” or ”Lo” and ” -- ” will light up alternate. After 1 min., the
message ”Lo” will disappear, but the lock will be still enabled.
!!! Lock of induction cooktop is active, until it is unlocked, in spite of switching on and switching off
the induction cooktop. Uncontrolled switching off the lock will be only in the case of switching off
the induction cooktop from the power supply and voltage loss.
Unlocking the induction cooktop takes place after holding the lock button – the key (5), until the
appears the sound signal.
Pause function
– Stop'n go
Pause function can be used at any time during cooking. It allows to stop the induction cooktop and come
back to it, with the heating levels previously adjusted.
•
Induction cooktop must work. After touching the sensor of pause (3), in places of thetags/markers
will light up the signs and operation of the induction cooktop will be deactivated within the scope of
all cooking zones. When enabled (3), you can use only the sensors (3) and (6).
•
Switching off the pause function will take place after holding the sensor (3), the tags/markers of of
previous settings will light up again, and induction cooktop will continue its operation.
Bridge function
baking tins/roasters. It causes that the control/steering takes place with one large area of the heating
(which consists of two cooking zones)- with left or with right.
!!! Bridge function incorporates two cooking zones, forming one large area of heating.
This function facilitates cooking with the help of large
cooking/kitchen utensils eg. baking tins/roasters. It causes
that the control/steering takes place with one large area of
the heating (which consists of two cooking zones)- with left
or with right.
•
Bridge function is activated, when you press marker
(tag) (8) . Heating level is set using a sensor -
Slider (3), for the whole area at once.
•
If cooking/kitchen utensil - during cooking - will be
moved to the second heating area, then Bridge
function automatically will switch over the heating
to the new surface and will adjust the same level of
the heating.
•
Switching off the Bridge function takes place by the
touching the sensor (8), sensors: