manualshive.com logo in svg

Solectek skyway series, Руководство пользователя


Поделиться
Скачать
background image

Regulatory Information:

iii

License. 

The technology and intellectual property embodied in the Product (the 

"Technology") are licensed, not sold, to you. You have a nonexclusive and nontransfer-

able right only to connect the Product to and to use the Technology with a single 

license control utility. You may not modify or make inoperable authorization keys or 

license control utilities. You may not transfer, sublicense or assign a license to the Prod-

uct or the Technology to another party except in accordance with Solectek's Product 

License Transfer Policy in effect at the time of such license grant. 
You understand that the Technology belongs to Solectek or its third party licensors (col-

lectively, "Solectek"), and they have the right to enforce this license. You agree to keep 

confidential and use your best efforts to prevent and protect the contents of the Tech-

nology from unauthorized disclosure or use. Solectek reserves all rights not expressly 

granted to you.

Limitations on use. 

You may not disclose or make available the Product or the 

Technology to any other party or permit others to use it except your  employees and 

agents who use it on your behalf and who have agreed to these license terms. You 

may not do any of the following with or to the Product or the Technology:  (a) make 

copies (except for backup or archival copies); (b) rent, lease or distribute copies; (c) 

make any alteration, modification, translation or the like without the prior written con-

sent of Solectek; or (d) reverse engineer, reverse assemble, reverse compile or other-

wise engage in similar manipulation. Any full or partial copy of the Product must include 

all copyright and other proprietary notices which appear on or in the Product. 
You must maintain adequate records to be able to control use of the Product and the 

Technology according to these license terms. These records must match the use of the 

Product and the Technology to the license grants. Solectek may require you to make 

these records available to Solectek or the third party developer or owner of the appli-

cable portion of the Product.
The term "authorization key" includes any unique series of data elements that is to be 

installed and enabled in a license control utility to allow use of the Product. Authoriza-

tion keys may be installed and enabled for use in only one license control utility at any 

one time. Authorization keys are non-transferable and confidential and must be 

destroyed on termination of this license. Unless otherwise specified, you may print 

electronic Product documentation as reasonably necessary to exercise your right to 

use the Product.

Terms and Limitations. 

This license is effective until terminated. You may terminate 

this license at any time by returning the Product to Solectek. This license automatically 

terminates if you fail to comply with its terms and conditions. You agree that upon such 

termination you will return the Product to Solectek, together with any other material 

you have received from Solectek in connection with the Product.

U.S. governing law and export restrictions. 

This license will be governed by 

the laws (other than choice of law principles) of the State of California, and in no event 

will it be governed by the U.N. convention of the international sale of goods. You 

acknowledge that the laws and regulations of the United States restrict the export and 

re-export of the Product and any related technical data. You agree that you will not 

export or re-export the Product or any related technical data in any form without first 

obtaining the appropriate United States and foreign government approval. 

Содержание skyway series







































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для skyway series

H3C RA100 Installation Manual preview
RA100
Бренд: H3C Страницы: 34
Watchguard XTM 5 Series Hardware Manual preview
XTM 5 Series
Бренд: Watchguard Страницы: 24
Moxa Technologies ICS-G7748A Series Quick Installation Manual preview
ICS-G7748A Series
Бренд: Moxa Technologies Страницы: 10
Ubiquiti PowerBeam AC Gen2 Quick Start Manual preview
PowerBeam AC Gen2
Бренд: Ubiquiti Страницы: 22
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Бренд: Riverbed Страницы: 38
AOpen 4-Port 10/100Mbps Ethernet Broadband Router User Manual preview
4-Port 10/100Mbps Ethernet Broadband Router
Бренд: AOpen Страницы: 41
XtendLan NVR-xUD User Manual preview
NVR-xUD
Бренд: XtendLan Страницы: 228
Eaton SONiX Pm10 Technical Manual preview
SONiX Pm10
Бренд: Eaton Страницы: 14
JUMO 705041 Installation Instructions Manual preview
705041
Бренд: JUMO Страницы: 60
Airlink101 AWMB100 User Manual preview
AWMB100
Бренд: Airlink101 Страницы: 46
Juniper MX480 Hardware Manual preview
MX480
Бренд: Juniper Страницы: 420
SafeHome NVR903 Manual preview
NVR903
Бренд: SafeHome Страницы: 24
TP-Link Archer MR600 User Manual preview
Archer MR600
Бренд: TP-Link Страницы: 113
VIA Technologies Mobile360 M810 Quick Start Manual preview
Mobile360 M810
Бренд: VIA Technologies Страницы: 25
Patton ipRocketLink 3101 Series Getting Started Manual preview
ipRocketLink 3101 Series
Бренд: Patton Страницы: 119
Netopia D3100-I User Reference Manual preview
D3100-I
Бренд: Netopia Страницы: 138
TRENDnet TEM-560T Specifications preview
TEM-560T
Бренд: TRENDnet Страницы: 2
Quamtum HotSpot HS2 User Manual preview
HotSpot HS2
Бренд: Quamtum Страницы: 42

Бренды по названию

Популярные бренды

Загрузить еще бренды