27
Control Keypad
________________________________________________________________________________________
7.5.3
Obtain Default Parameters
Press the
Mode
and
ź
keys simultaneously.
The LCD will display:
TEST/MAINTENANCE
***OPTIONS***
Press the
Select
key
three times
.
The LCD will display:
STORE ENABLE
DEFAULT PARAMET.
Press the
Store
+
Mode
keys simultaneously.
The LCD will display:
DATA SAVED OK
And after a few seconds the LCD will display:
% OF MOTOR FLA
I<0.1 FLC
CAUTION!
Obtaining DEFAULT PARAMETERS erases all previously modified settings
and requires the operator to
reprogram
all parameters that differ from the
factory default.
Note
: It is especially important to reprogram the
FLC
(as shown on the label of
the RVS-DXM),
FLA
and RATED LINE VOLT. value again.
7.5.4
Reset Statistical Data
Press the
Mode
and
ź
keys simultaneously.
The LCD will display:
TEST/MAINTENANCE
***OPTIONS***
Press the
Select
key
four times
.
The LCD will display:
RESET STATISTICS
Press the
Reset
+
Store
keys simultaneously.
The LCD will display:
DATA SAVED OK
And after a few seconds the LCD will display:
STATISTICAL DATA
- **** -
Press the
Mode
and go back to:
% OF MOTOR FLA
I<0.1 FLC
