manualshive.com logo in svg

Solartron Metrology SI7500, Быстрый старт

Поделиться
Скачать
Solartron Metrology SI7500 Скачать руководство пользователя страница 32

5.0 Setting up the SI7500 (cont.)

502858  issue 1.1

5.0 Setting up the SI7500 (cont.)

30

5.10 Communications & Data Storage

The SI7500 can communicate measuring results by means of printing, storing or transmitting data through its onboard USB, RS-232 and Parallel ports. This 

section details the setup options for the RS-232 and USB ports. For a full list of the available options and their implementation, please refer to the SI7500 User 

Manual (document number 502823).

5.10.1 RS-232 Setup

The  RS-232 screen contains the following fields for specifying the RS-232 serial port settings for 

communication with a computer or RS-232 channel input device. Where possible, the settings should be 

identical to those on the receiving device.

UART ID:

 For communication to any RS-232 device, this option should be set to "Primary".

Baud rate:

 The Baud field is used to specify the baud rate of serial data. Use the Dec or Inc softkey to 

decrease or increase the baud rate from 1200 to 115,200. 

Word length:

 The Word Len field is used to specify the number of bits con tained in each data word. Use the 7 or 8 softkey to specify the word length.

Stop bits:

 The Stop Bits field is used to specify the number of stop bits in cluded after each data word. Use the 1 or 2 softkey to specify the number of stop 

bits.

Содержание SI7500








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды