Solartron Metrology SI7500, Быстрый старт

Страница: 3 / 39

Contents
502858 issue 1.1
Contents
1
Section Contents Page
5.8.2 Nominal With ++ Tolerances 22
5.8.3 Nominal With -- Tolerances 23
5.8.4 Nominal With Fixed Limits 24
5.9 SPC Configuration 25
5.9.1 UCL & LCL Or Xbar & r UCL & LCL 27
5.10 Communications & Data Storage 30
5.10.1 RS-232 Setup 30
5.10.2 USB Setup 32
5.11 Backing Up 33
6.0 Operation 34
6.1 Basic Operation 34
6.2 Selecting A Part 34
6.3 Establishing A Measurement Reference 35
6.4 Conduct A Measurement 36
6.5 Review Measurement Data 36
6.6 Send Or Report Results 37
Section Contents Page
1.0 About this Manual 2
2.0 Safety Information 3
3.0 Introduction to the SI7500 5
3.1 Functionality Of The SI7500 5
3.2 Navigating The Menu 7
4.0 Getting Started 9
4.1 Setup Procedure 9
4.2 Connecting Orbit Hardware 10
5.0 Setting up the SI7500 12
5.1 Accessing The Setup Menu 12
5.2 Entering The Supervisor Password 13
5.3 Assigning Orbit Modules To Channel Inputs 14
5.4 Parts, Dimensions, Formulas & Channels 16
5.6 Creating A Part And Dimensions 17
5.7 Creating Formulas 18
5.8 Limts & Tolerances 20
5.8.1 Nominal With +/- Tolerances 21