5.0 Setting up the SI7500 (cont.)
502858 issue 1.1
5.0 Setting up the SI7500 (cont.)
14
5.3 Assigning Orbit Modules To Channel Inputs
The flow chart below outlines the procedure to follow in setting up & assigning Orbit modules to SI7500 channel inputs:
Firstly, scroll to the Channel screen from the setup menu.
Select the channel number of choice using the decrement & increment softkeys.
Move the cursor to the “Id” field. Select either a) Teach or b) Entry with the relevant softkey to register the Orbit module in
question. Either of these 2 options will associate a particular Orbit module with one of the SI7500’s input channels.
Specify the Input
channel number
Specify the
channel setup
parameters
Teach the Orbit
Module or Enter
it’s ID
