SolarMax TS-SV, Руководство пользователя и инструкция по установке

Страница: 20 / 66

20
4.1.2 Storage conditions
Store the inverter in a dry, enclosed space.
CAUTION
Possible damage to the device! Never store the inverter outdoors. Not even for a short
time.
4.2 Site selection and operating conditions of the inverter
4.2.1 Specifications and instructions for site selection
Choosing a suitable location for the inverter is decisive for its operating safety as well as
its expected service life and efficiency. An ideal location is indoors or in a container with
the following characteristics:
■ ■
The site must be dry to prevent any condensation from collecting in the inverter: no
puddles, no damp masonry walls, no openings where snow or rain can enter.
■ ■
The ambient air of the inverter must be free from dust, salt, and ammonium vapours.
If required (e.g. for installations near the sea or in desert areas), the ambient air of the
inverter must be filtered (e.g. with an air conditioning unit or a filter).
■ ■
Do not install the inverter in rooms or work areas which contain or are made of com-
bustible materials. Follow the local fire safety regulations.
DANGER
!
Fatal electric shock hazard! – The inverter must be installed in an enclosed electrical
plant room so that unauthorized persons have no access.
CAUTION
Fire hazard! - Suitable for mounting on concrete or other non-combustible surface
only!
■ ■
Because the inverter is a source of noise, do not install it near residential spaces.
■ ■
Make sure that the floor of the installation site is level and its bearing capacity is
adequate.
■ ■
The inverter must be installed on the entire contact face of the 6 bases.