SolarMax 10260200, Инструкция по эксплуатации

Страница: 13 / 40

13
en
4�2 Selecting the installation location
DANGER!
Fatal fire or explosion hazard!
The inverter is an electrical device with heat generation and the possibility of
sparking.
■
Install the inverter in an environment that is free of flammable gases and fluids
■
Never install the inverter near combustible materials. The installation base
must be non-combustible.
■
Follow the local fire safety regulations.
Select the installation site according to the following indications:
■
The inverter is protected to IP65 and can be installed indoors or outdoors. Select a dry
location protected from water and snow
■
Install the inverter in an easily accessible location, so that the maintenance work can be
carried out easily
■
Do not install the inverter in a place where personnel are likely to come into contact with
its enclosure and heat sinks because these parts are extremely hot during operation.
■
Do not expose the inverter to direct sunlight
■
Never install one inverter above another (this would reduce the cooling effect)
■
The environmental temperature in the installation site must be between -25°C and +45°C
■
Make sure there is a good air circulation. An insufficient air circulation may reduce the
performance and the lifetime of the components inside the inverter.
■
Maintain the following minimum installation distances:
40 cm
60 cm
60 cm
40 cm
Fig. 5: Minimum installation distances of SHT inverters