About This Guide
SolarEdge Installation Guide for Three Phase Inverters
– EU – Version 1.5
2
About This Guide
This user guide is intended for Photovoltaic (PV) system owners, installers,
technicians, maintainers and integrators who are authorized to install and
connect a SolarEdge power harvesting system.
This guide describes the process of installing SolarEdge power optimizers
and SolarEdge Three Phase Inverters. This guide does not describe how to
install the PV modules. The inverter models covered in this guide are:
SE8k, SE10k and, SE12k. The power optimizer models covered in the
guide are OP250-LV, OP300-MV, OP400-MV, PB250-AOB, PB350-AOB,
PB250-TFI and PB350-TFI.
The guide includes the following chapters:
Chapter 1, Introducing the SolarEdge Power Harvesting System,
page 9, introduces the components of the SolarEdge power harvesting
solution.
Chapter 2, Installing the Power Optimizers,
page 15, describes how
to install the SolarEdge power optimizers.
Chapter 3, Installing the Inverter,
page 25, describes the process of
installing and connecting a SolarEdge Three Phase Inverter.
Chapter 4,
Commissioning the Installation,
page 37, describes how
to activate the system, commission the power optimizers and verify the
proper functioning of the system.
Chapter 5, Replacing and Adding System Components,
page 46,
describes how to replace or add various SolarEdge system components
after the initial installation.
Chapter 6, Setting Up Communication,
page 50, describes how to
install and set up communication between the inverter and the
SolarEdge Monitoring Server.
Chapter 7, Inverter User Interface,
page 61, describes how to
configure the inverter and how to identify its status.
