Installing the Inverter
SolarEdge Installation Guide for Three Phase Inverters
– EU – Version 1.5
28
3
Hang the inverter on the bracket using the screws on the inverter’s top,
as shown below:
Figure 10: Hanging the Inverter on the Bracket
CAUTION:
Do not rest the connectors at the bottom of the inverter on the ground at any
time, as it may damage them. If you need to rest the chassis on the ground, lay
it on its back, front or side, not on its bottom.
4
Let the chassis lay flat against the wall or pole. Then, screw two screws
into the right and left sides of the bottom of the bracket. The screws go
through the outer heat sink on either side into the bracket, as shown
below:
Figure 11: Inserting the Screws into the Bottom Heat Sink
