SolarEdge OP250-LV, Руководство по установке

Страница: 89 / 122

Inverter User Interface
SolarEdge Installation Guide – MAN-01-00002-1.6
89
►
To configure the inverter:
1
Verify that the inverter’s ON/OFF switch is OFF.
2
Press the LCD Light button once to turn ON the backlight.
WARNING!
If the inverter worked properly before this action, the following message is
displayed.
Si l'onduleur fonctionnait proprement avant cette opération, le message suivant
est affiché:
This message is displayed until the DC is safe.
The default safety voltage is 50 V.
Do not open the cover or open DC conectocrs until the voltage is indicated as
safe or until at least five minutes have passed.
Ce message est affiché jusqu'à ce que la tension DC soit sécurisée.
La tension de sécurité par défault est de 50V.
Ne pas ouvrir le couvercle ou les connecteurs DC jusqu'à ce que la tension soit
affichée comme sécurisé ou jusqu'à ce que cinq minutes au moins se soient
écoulées.
3
The following configuration procedures are performed with the inverter
cover open. Open the cover, as described in the Opening the Cover section on
page 37.
NOTE:
There are two options for configuring the inverter. One is performed by
pressing the external LCD button, which provides access to the most
commonly used options. If you only want to perform pairing, you can do so
without opening the inverter cover, as described in the
LCD Button Menu
Options section on page 98.