SolarEdge OP250-LV, Руководство по установке

Страница: 87 / 122

Inverter User Interface
SolarEdge Installation Guide – MAN-01-00002-1.6
87
NOTE:
This window is unique in that its backlight is ON by default for 15 minutes after you
press the LCD light button (and not 30 seconds like other windows). This length of
time can be configured, as described on page 96.
NOTE:
In order to verify proper installation, a technician may want to view the Telemetry
window for some time in order to see that all power optimizers report their
telemetries.
M o d u l e # : M 3 2 5 6
E n e r g y [ W h ] : 0 . 0
V d c _ O [ V ] : 6 9 . 5
V d c _ I [ V ] : 2 9 . 5
Clicking the LCD light button again redisplays the Initial Inverter Status window,
as described on page 85.
ID Status Window
After you press the inverter’s LCD light button to display the window shown
above, you can press it again to display the Inverter ID window. This window
describes the software version and which country for which the inverter is
configured.
I D : # # # # # # # # # #
D S P 1 / 2 : 1 . 0 2 1 0 / 1 . 0 0 3 4
C P U : 0 0 0 2 . 0 1 1 1
C o u n t r y : U S A
Communication Status Window
After you press the inverter’s LCD light button to display the window shown
above, you can press it again to display the Inverter Communication Status
window. This window displays the communication settings.
C o m m : R S 2 3 2 < S _ O K >
S t a t u s : < O K >
R S 4 8 5 < 0 0 0 > < Z B < - - - >