Solar Stik ATSC MS3 L0, Руководство по установке и эксплуатации

Страница: 37 / 105

| 37 February 2020 | Solar Stik ® , Inc.
System Setup and Operation Manual for ATSC MS3 L0
Orange menu items indicate values that are set by Solar Stik for a specific application.
These values (with the exception of setting the clock to local time) should not be
changed by the user without consulting tech@solarstik.com.
Green menu items represent factory default settings, read-only settings, or options that
exist within a specific menu item.
Gray menu items highlight features that are NOT currently used in the PRO-Verter
5000. If TECH: 07 Show All Menus = “No”, then items in a gray window will not be
visible to the user.
Light green menu items represent resettable menu selections. Press and hold the knob
for 3 seconds to reset values.
Menu Map Color Coding Key
F L0 PRO-Verter Programming Menu Map
The PRO-Verter has been programmed at the factory to operate with the MS3 L0 System. The
programming map on the following pages is a representation of how to navigate the information
in the PRO-Verter User Interface. The color coding key below provides information that makes
understanding the programming map easier.
FAVS Button Menus
FAVS
F1 Battery Type
CC/CV
F4 LBCO
23.6 Volts
F2 AmpHour Size
450AH
F3 AC Input
Amps = 20A
F5 Gen Run VDC
Set Stop Gen
Volts = 28.8
Set Stop Volts
Delay = 1 Min
Set Start Gen
Volts = 25.0
Set Start Volts
Delay = 15 sec
Set CV Chg Done
HOLD CV/CHG VDC
Set CV Charge
Volts = 29.0
Set Max Charge
AMPS = 100