Always allow the heater to cool before attempting to
reposition/move. Never attempt to move the heater
while it is switched on!
Observe the minimum safe distance between the heater
body and inflammable surfaces and objects when
mounting.
Please refer to Table 1 for the recommended
positioning of the heater with regards to minimum
distances. Do not install the heater in a corner!
Keep out of the reach of children.
1.
When wall mounting, securely fasten the L
-
shaped
wall brackets to the mounting surface using both of the
fixing holes in the short part of the bracket (see Fig. D for
mounting hole centres). Please refer to Table 1 for
recommended positioning of the heater. Please note. wall
fixings are not supplied. They should be selected to
substantially support the weight of the installation. If in
doubt contact a professional for advice! When hanging
from a ceiling two equal length and gauge chains are
required and should be selected with fixings that are ad-
equate to hold the weight of the heater. Again, if in doubt
contact a professional for advice!
2.
The heater should be mounted with the terminal box
at the bottom of the heater when being wall mounted.
3.
When wall mounting, fix in the required angular
position by tightening the fixing bolts on the brackets at
the rear of the heater as shown in Fig. C. The heater
should face directly down when hanging.
4.
Secure the supply cable so it is not resting on the
body or obstructing the air
-
vents.
Always isolate the heater from the mains supply when
adjusting the position.
DRILLING HOLE TEMPLATE DIMENSIONS FOR WALL MOUNTED BRACKETS
Fig. D
7
Fig. B
Fig. C
TERMINAL
BOX
S
E
E
T
A
B
L
E
1
F
O
R
M
IN
IM
U
M
D
IM
E
N
S
IO
N
S
