Sokkia GSR2600, Руководство по эксплуатации, Страница: 91 / 118

Collecting Data Chapter 7
GSR2600 83
7.2 Defining Data to be Collected
You can define what type of information should be collected
during a data collection session by using tools available in the
Sokkia Planning software to create configurations for the
GSR2600. The following sections give an overview of using
configurations. For more information, refer to your Planning
Reference Manual.
7.2.1 Using receiver configurations
Receiver configurations are groups or sets of data that tell your
receiver what type of information should be stored during a
data collection session. A configuration consists of the
following:
Logs ......................................List of what type of data to collect
(ephemeris-rawephemb)
Destination .........................Where the data should be stored
(data card, COM1 or COM2)
Interval .................................When the data should be collected
(every 10 seconds - ontime 10)
The configuration can also identify position (none, fixed or
averaged) and point information such as the antenna height
and elevation mask.
Configurations are transferred to the receiver from the Planning
software (refer to your Planning Reference Manual for
information on setting up schedules).
The Planning software provides several predefined
configurations based on different data collection methods. You
can simply select one of these predefined configurations (For
example, Static) for your session, or you can define your own
configuration.
750-1-0093 Rev 1.book Page 83 Friday, June 28, 2002 4:02 PM