Sokkia GSR2600, Руководство по эксплуатации

Страница: 72 / 118

64 GSR2600
Chapter 6 LCD Display
6.4.5 Cutoff
This menu shows the elevation cut-off angle for tracked
satellites.
When you set a cutoff angle, all satellites that fall below the
angle will be ignored by the GSR2600 when determining
position. The Cutoff screen enables you to change the elevation
cutoff value by following these steps:
1. Press the <Ent> key
2. Use the left and right arrow keys to the position of the value
you want to set.
3. Use the up and down keys to change the number higher or
lower.
4. When satisfied with the new elevation, press <Ent> to set
the new value and return to the Cutoff screen.
Note: Changes you make to the elevation cutoff angle are
not saved when the receiver is shutdown. The receiver will
default to a 5 degree cutoff angle on startup.
6.4.5.1 Cutoff angles and configurations
When a configuration is started, the elevation cutoff is
automatically set to the configuration's cutoff angle, and any
changes you made to the elevation cutoff angle is overwritten.
Example:
The elevation cutoff angle will be changed to 20.0 degrees when
a configuration that has an elevation cutoff angle of 20.0
degrees is started, even if you previously set the elevation cutoff
angle to 5.5 degrees.
750-1-0093 Rev 1.book Page 64 Friday, June 28, 2002 4:02 PM