Sokkia GSR2600, Руководство по эксплуатации

Страница: 37 / 118

Basic Operations Chapter 4
GSR2600 29
The GSR2600 will remain off unless one of the following
happens:
• Time arrives for a scheduled session to begin
• COM port activity is detected
• Power button is pressed
If either happens, the GSR2600 will automatically turn back on.
4.3 Scheduled Session
The GSR2600 can be set up to run schedules at specific time,
and even to turn off between schedules to conserve battery
power. These options are configured using the SETTINGS >
Sleep
(see Section 6.6.2, Sleep, Page 70) and CFG RCVR >
Sched (see Section 6.4.3, Sched, Page 61) menus.
When both Sleep and Sched are enabled, the following is the
behaviour of the GSR2600 receiver:
• When the receiver is on, if a schedule is to start within the
next five minutes, the GSR2600 will remain on. If the
schedule is not set to start for more than five minutes, the
GSR2600 will conserve battery power by turning itself off.
• When the time is five minutes before the schedule is to
begin, the GSR2600 will turn on.
• When you use the Sched menu to enable the scheduler, the
GSR2600 LCD will flash SCHED in the upper right corner
of the screen. This is a quick way to assure yourself that the
GSR2600 has been set to automatically run schedules.
Note: The reason the GSR2600 can turn off between
data-collection sessions is because of an internal clock that
is synchronized to GPS time. This clock acts like an alarm to
turn on the GSR2600.
750-1-0093 Rev 1.book Page 29 Friday, June 28, 2002 4:02 PM