Sokkia GSR2600, Руководство по эксплуатации, Страница: 70 / 118

62 GSR2600
Chapter 6 LCD Display
Note: There are times when the GSR2600 may override the
state of the scheduler, such as when the receiver is first
turned on. At this time, if there is no powerup group
present, the receiver will enable the scheduler even if you
disabled it previously.
For more information on schedules, see Section 7.1.2, Scheduled
data collection, Page 81 and refer to your Planning Reference
Manual.
6.4.4 Schedule
This screen is actually a series of screens that shows information
about all schedules stored on the receiver.
The first screen “SCHED 0 stbase” displays the schedule
number and the configuration that will run.
The next two screens display the schedule’s start and stop
times. The start time and stop time are specified in the
following UTC format:
dddddddhhmm
where:
ddddddd ...........Represents up to 7 days of the week.
hh .......................Represents the hour (in 24-hour notation).
mm .....................Represents the minute.
750-1-0093 Rev 1.book Page 62 Friday, June 28, 2002 4:02 PM