Sokkia GSR2600, Руководство по эксплуатации

Страница: 89 / 118

Collecting Data Chapter 7
GSR2600 81
If you want to run a configuration other than POWERUP, you
can use the CFG RCVR menu to start and stop configurations,
as well as to enable the scheduler (see Section 6.4, CFG RCVR >
Home, Page 58).
7.1.2 Scheduled data collection
A scheduled configuration is set to run at a specified time (see
Section 4.3, Scheduled Session, Page 29). By setting a schedule,
you can quickly and easily set your receiver to collect data
unattended in the field.
You can schedule your GSR2600 to collect data repetitively (For
example, every day from 15:00 to 17:00), or customized (For
example, tomorrow from 10:00 to 11:00 and the day after from
17:00 to 18:00).
Note: In order for a schedule to automatically run, the
GSR2600’s scheduler must be enabled. For more
information, see Section 6.4, CFG RCVR > Home, Page 58.
7.1.2.1 Schedule guidelines
The following are the guidelines for setting schedules:
• You can schedule data collection for up to seven days in a
one-week period, with up to 35 sessions per day.
• The scheduler operates perpetually (For example, if an
event is scheduled to occur on a Monday, this event is
serviced every Monday that the system is in operation).
• Start and stop times must be provided with a resolution of 1
minute.
• The minimum time interval per data collection session is 5
minutes (300 seconds).
750-1-0093 Rev 1.book Page 81 Friday, June 28, 2002 4:02 PM