Sokkia GSR2600, Руководство по эксплуатации

Страница: 30 / 118

22 GSR2600
Chapter 3 General Components
3.6 Ports and Cables
As shown in Figure 2, GSR2600 Back View, Page 11, the rear
end-cap has four labeled ports: COM2, COM1, PWR, and GPS.
Each GSR2600 cable connector is keyed to ensure that the cable
can be inserted only one way to prevent damage to both the
GSR2600 and the cables. In addition, the connectors that are
used to secure the cables to the GSR2600 have a locking
mechanism that requires careful insertion and removal.
Observe the following when handling cables:
• Before inserting the cable, make certain you are using the
appropriate cable for the port.
• Line up the red dot on the connector shell with the red
index mark on the GSR2600’s receptacle.
• Insert the connector until it seats with a click; it is now
locked in place.
• To remove the cable, grasp the connector by the knurled
ring and pull. DO NOT PULL DIRECTLY ON THE CABLE.
Note:
Cables should be handled with care. They should not
be routed over surfaces where they could be stepped on,
pinched, or cut.
The following sections introduce the GSR2600 ports, and their
applicable cables. For more information, refer to the GSR2600
Advanced Reference Materials document on your Sokkia Complete
Product CD.
750-1-0093 Rev 1.book Page 22 Friday, June 28, 2002 4:02 PM