Soham Impex SI-TIG-300, Руководство по эксплуатации

Страница: 15 / 47

[12]
B:- Connections for STICK MMA (SMAW) Welding
1.
Negative power connector - Connect the earth lead to by inserting and twisting until tight and the
earth clamp to work/bench
2.
Positive power con Connect the electrode holder by inserting and twisting until tight
All other front panel connectors are not used for MMA welding
●
Gas cylinder installation
Gas cylinder installation
1. Stand the gas cylinder on the trolley and secure it by fixing the cylinder
strap around a point in the top third of the cylinder-but never around the
neck of the cylinder.
2. Take the protective cap off the gas cylinder.
3. Gently turn the gas-cylinder value anticlockwise, and blow off any dust
and dirt.
4. Screw the pressure regulator onto the gas cylinder and tighten it.
5. Connect the shielding-gas connector to the pressure regulator.
Note :-

To avoid a High Frequency shock keep the Tig torch in good condition and replace if any of
the insulation is damaged.

Connect the gas input hose to gas regulator and use ‗Gas Test ‗ Button
to Set gas flow /
pressure to 8-12 LPM. Make sure gas bottle is secured and properly mounted in trolley to
avoid injury.