Soehnle 3035 Скачать руководство пользователя страница 120 | Manualshive

Страница: 120 / 240

Soehnle 3035 Скачать руководство пользователя страница 120

120

Totaling of items outside of the classification
Totaling items outside of a specified classification range can be prevented. If the weight value is
outside of the classification, the error message Error 27 "Outside of Tolerance" is displayed after
pressing the F6 Plus key.
For this purpose, Program Settings / Classification / Totaling Outside of Class must be switched to
"Within" in setup mode.

6.9.7 Display options with the Info key

Pressing the key gives you the following options:

•

F1 Fixed tare

Displays the stored fixed tare values (fixed tare memory).

•

F2 Class. Fix

Displays the stored fixed classification values (Class. Fix memory)

•

F3 Target values

Displays the enabled class limits

•

F4 Total

Displays the current totals in the totaling memory

•

F5 Plus

Displays all items stored in the totaling memory (item list). The individual items can be
retrieved with the Arrow keys (F3/F4).

•

Tare key

Displays the current tare weight in tare memory.
Press the key after pressing the key.

6.9.8 Save the current values to fixed memory

In order to save target values with lower limits and upper limits directly to fixed memory, start by
saving the target value with lower limits and upper limits.

Pressing the F5 Enter Fix key in the 2nd function key level opens the Class. Fix memory. The target
weight and the tolerance have already been saved.
The part name and the part number are then added.

«
...
118
119
120
121
122
...
»

Содержание 3035

















































































































































































































































Отзывы:

Нет отзывов