Soehnle 3035 Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 240

Soehnle 3035 Скачать руководство пользователя страница 103

103

Operating the totaling function
Press the Function Page key    to start the Addition Function level

Plus F6
Press the F6 Plus key to save the weight on the weighing bridge to the totaling memory. The item
counter and the sequential number are incremented by 1.
Prior to a new totaling transaction, the scale must be relieved by a minimum relief factor specified
in setup mode.
A weight value of 0 or totaling without relieving the scale is displayed with "Error 55 - Place
Weight" (relief factor = 0 only requires a weight change).
Gross, tare, and net weights can be totaled.

Cancel F5
The F5 Cancel key is used to cancel or reverse weigh individual items.
Pressing the Cancel key is followed by the prompt to either place the weight to be canceled on the
scale, or to enter the sequential number of the weight to be canceled.
Information about the sequential number can be retrieved with the key combination          and F5
Plus.
Use the number keypad to enter the sequential number of the item to be canceled and confirm
with F6 Save.
If no sequential number is entered, the weight value on the scale is saved by pressing the F6 key.
The error message Error 46 is displayed if the scale is not under load.
Cancellations or reverse weighings are marked in the printed receipt as Cancellation.
A cancellation causes the sequential number to be incremented by one, while the item counter is
decremented by one.
If the item counter is 0, no further cancellations are possible; this is displayed by error message
Error 48.

Total F4
The F4 Total key finishes the totaling.
The display now shows the gross, tare, and net totals, along with the item counter and the
sequential number of the last transaction.

Available choices for displaying the total
Deleting the totaling memory
The following functions can be assigned to the Total function key:

•

Display, print, and delete total

After pressing the Total function key, the totals are displayed for 3 seconds, and the
memory contents are printed and deleted at the same time. A new totaling transaction can
then be started.

•

Only display totals

After pressing the Total function key, the user can decide whether to delete the totaling
memory.
Press the F2 Delete Total key to delete the totaling memory; this is followed by the security
question "Delete Total?". The F1 to F3 YES keys are used to delete the totaling memory,
whereas the totaling memory is not deleted with the F4 to F6 NO keys.
Press the F6 Back key to continue totaling without deleting the memory.

«
...
101
102
103
104
105
...
»

Содержание 3035

















































































































































































































































Отзывы:

Нет отзывов