7
SUNSYS pro - SUNSYS station
- Ref.: IOMSUNMOXX00-GB 00
ENGLISH
1. SAFETY INSTRUCTIONS
DANGER!
Risk of electric shock from live device parts!
The photovoltaic modules are live as soon as they are exposed to sunlight.
• Take suitable measures and make sure there is no power remaining.
1.2. COMPLIANT
USE
SUNSYS pro
and
SUNSYS station
are photovoltaic inverters for the conversion of direct current into alternating current in compliance
with the mains network.
Any use other than the specified purpose will therefore be considered as improper. The manufacturer/supplier shall not be held
responsible for damage resulting from this. The risk and responsibility lies with the system manager.
SUNSYS pro
and
SUNSYS station
are constructed in accordance with current technical regulations and official safety standards.
Before shipment all devices undergo technical safety testing. Nevertheless, incorrect or improper use may endanger the life or health
of the operator and third parties, or damage equipment or other materials.
Compliant use also includes observing operating instructions.
SUNSYS pro
and
SUNSYS station
must be installed by specialist
personnel deemed responsible for complying with existing standards. Repair work may only be carried out by authorised centres.
Arbitrary and unauthorised work may have fatal consequences, cause injury or damage property. In the event of damage, SOCOMEC
shall assume no responsibility and the warranty shall be void.
1.3. STANDARDS AND GUIDELINES
When carrying out electrical installation, all standards specified by the IEC and the electricity supplier must be observed.
Certificate of compliance
SUNSYS pro
and
SUNSYS station
comply with all technical and construction-related requirements from a safety perspective, with
the electromagnetic compatibility directive (2004/108/EC) and the low voltage directive (2006/95/EC).
The SUNSYS station series also complies with the following standards and directives:
- EN 50178: 1997-03 Electronic equipment for use in power installations
- IEC 62109-1: 2010-04 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements
- EN 61000-3-11: 2000-08 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctua-
tions and flicker in public low-voltage supply systems - Equipment with rated current
≤
75 A and subject to conditional connection
- EN 61000-6-2; 2006-03 Electromagnetic Compatibility (EMC) - Part 6-2: Generic standards - Immunity for Industrial Environments
- EN 61000-6-4: 2007-09 Electromagnetic Compatibility (EMC) - Part 6-4: Generic standards – Generic Standard Interference
Emission for Industrial Environments
- EN 61000-3-12: 2005-09 Electromagnetic Compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by
equipment connected to public low-voltage systems with input current >16 A and inferior or equal 75 A per phase.
The following documents or national standards apply to photovoltaic systems:
- DIN V VDE V 0126-1-1: 2006-02 Automatic disconnection device between a generator and the public low voltage grid (Germany)
- CEI 0-16: 2009-04 Reference technical rules for the connection of active and passive consumers to the HV and MV electrical
networks of distribution Company (Italy)
- Guide to connection to the Enel Distribuzione mains electricity network Ed. 1.1 (Italy)
- CEI 11-20: 2000-08 Electrical energy production system and uninterruptible power systems connected to class I and class II
network (Italy)
- CEI Guide 82-25: Guide to the production of photovoltaic generation systems connected to medium and low voltage electricity
networks
- RD 1663/2000 + RD 661/2007: Conexión de instalaciones fotovoltaicas a la red de baja tensión (Spain)