SOCOMEC retains full and exclusive ownership rights over this document. Only a personal right to use the document for the appli-
cation indicated by SOCOMEC is granted to the recipient of the document. Any reproduction, modification or dissemination of this
document, either partially or completely and by any means, is expressly prohibited except upon Socomec's express prior written
consent.
This document is not contractual. SOCOMEC reserves the right to make any changes to this information without prior notice.
3
SUNSYS pro - SUNSYS station
- Ref.: IOMSUNMOXX00-GB 00
ENGLISH
CONVENTIONS USED
The following safety warnings and symbols can be found in these operating instructions:
DANGER!
Risk of death if not observed.
DANGER!
Risk of death due to electrical voltage.
WARNING!
Risk of damage to the system if not observed.
ADVICE
Useful information.
ADVICE
Refer to the operating manual or other documents
-
Instructions on actions to be carried out: The terms written in italics refer to definitions on the display.
WARNING!
Risk of electric shock!
Wait for the stored energy to discharge (the time is indicated underneath the symbol).
X min
III. failure to observe the instructions for installation, use and maintenance described in the Installation and User Manuals.
IV. modifications or repairs attempted by personnel not authorised by the Sicon S.r.l. After Sales Service.
V. damage due to atmospheric discharges, floods, fires, earthquakes, uprisings, wars or other causes of force majeure or
deriving from any other reason different from normal operating conditions of the inverters and beyond the control of Sicon
S.r.l..
VI. damage caused by voltage overloads.
VII. damage due to corrosion.
VIII. inadequate transport.
IX. failure of the user to comply with standards in force.
b) The warranty is also invalid if:
I. if the faulty product and/or component is not returned to Sicon S.r.l. in its original packaging or equivalent.
II.
if the serial number identifying the products has been tampered with or is not clearly identifiable.
III.
if the fault concerns aspects pertaining to appearance or construction which do not affect normal product operation.
c) Requests not relating to rights established by warranty conditions are not covered by the warranty and in particular, requests
for the refund of damages for loss of production, loss of earnings, or due to product defects or installation/dismantling costs.
