SnowEx V-Pro 32200, Руководство пользователя

Страница: 13 / 24

Lit. No. 74256, Rev. 02 13 February 15, 2020
MOUNTING THE SPREADER
CAUTION
Before drilling holes, check to be sure that no
vehicle wiring or other components could be
damaged.
9. Remove the spreader from the vehicle bed and
drill 1/2" holes at the marked locations.
NOTE: Pay special attention when drilling or
clamping dissimilar metals to aluminum bodies.
Galvanic corrosion can occur if not handled
properly. Contact vehicle manufacturer for
recommended attachment practices.
Ratchet Strap
Optional
Mounting Bars
Cross straps
and secure
to UTV bed.
10. Install the spreader to the vehicle using the
supplied 1/2" x 3" carriage bolts and 1/2" locknuts.
11. Tighten all fasteners according to the torque chart.
12. Install the four ratchet straps as shown below.
NOTE: It is important for safety that this strapping
method be used as the standard mounting
procedure.