OPERATION AND INSTALLATION INSTRUCTIONS FOR INS-ACC-60 STANDALONE
PROXIMITY FOB AND CARD READER
The
INS-ACC-60 is a standalone proximity key fob reade
r i
n Unique 125 kHz standard. The dev
ice is designed t
o contr
ol one outpu
t
b
y means of key fobs stored in the reader's memory. The output can be used to control external devices such as: reversible
E-lock or relay. The reader is installed in a standard 060 mm electrical box or can be surface-mounted using an optional box
to be purchased separately.
INS-ACC-60 supports up to 6144 key fobs, assigned in the same way as with other Aco products of the CDNP7ACC and
series (any number of key fobs assigned to each apartment, including the master and installer’s key fobs). The
reader also supports simple adding of key fobs using the master key fob (without having to connect it to a PC) or advanced
adding and managing of key fobs via ACC_v73 software (version v7.3 or higher) which can be downloaded free of charge
from
(use a CDN-USB cable to connect the reader with a PC, to be purchased separately).
INS-ACC-60 signals the output activity (such as door opening) by a sound signal (built-in buzzer, which can be
switched off using the computer software).
1.
TECHNICAL PARAMETERS
- Power supply: 12V-15V DC; 40mA (without output load)
- Power consumption in standby mode: ~0.3W
- Output current capacity 1A max. (0.5 A for reversible E-lock)
- Output control method: pulse short-to-ground (for E-lock) or permanent short-to-ground (for relay/gate)
- Maximum number of cards/key fobs: 6144
- Card/key fob reading standard: Unique 125 kHz
ACO Sp. z o.o. sp. komandytowa, 62-002 Suchy Las, ul. Diamentowa 7, tel./ fax 61 843 93 71
