14
8.2.4 Assembly and disassembly of the driven pulley of
the cvt
Before assembly of the driven pulley, the shaft should be
lubricated with grease.
Insert sleeve - for the engine 9 hp - 3 mm, for the engine 15 hp
- 3 mm and 20 mm. Then, set the key bolt and coupling half with
the spring as shown in the photo.
After wearing a movable cvt disc, rotate it clockwise 120° and
lock the shaft, for example, with a wooden wedge.
Fix the thrust washer onto the shaft.
Then, set the key bolt and the fixed pulley cone, and for the
model with the engine 15 hp set the bushing of 20 mm. Secure
with the bolt and a washer.
When fastening a bolt, use the anaerobic thread lock. Disassemble
in the reverse sequence.
