21
Speed Trap’s installed near them but which are still considered High Risk
Zones. Schools and High Risk Zones can be selected independently by
following these instructions.
To adjust these settings use either the MODE/MENU button (button 1) or the
MUTE/CANCEL button (button2) to go through the options (School, Risk
zone or Others). Once your desired option is displayed press the SELECT
button (button 3). Then using either buttons 1 or 2 you can select your
preferred setting. Once you have chosen your desired setting press the
SELECT button. The unit will confirm the new setting by displaying ‘Changed’
twice and will then return to the Menu.
4. Bright
There are three settings that you can choose from for the brightness of the
LED display. They are Bright, Dark or Dim.
To adjust the brightness press either the MODE/MENU button (button 1) or
the MUTE/CANCEL button (button2) until your preferred setting is displayed
then press the SELECT button (button 3). The unit will confirm the new
setting by displaying ‘Changed’ twice and will return to the Menu.
5. Set Time
The Snooper Evolution can be configured to display the time on the Standby
Screen. This reading is generated in Greenwich Mean Time (GMT) directly
from the satellites and is completely accurate. However it does not
automatically adjust for British Summer Time (BST) and is required to be
adjusted manually. The device is supplied with the factory default setting of
‘GMT + 0’.
To increase the time difference from GMT press the MODE/MENU button
until you reach your desired setting then press the SELECT button. The unit
will confirm the new setting by displaying ‘Changed’ twice and will then return
to the Menu.
To reduce the time difference from GMT press the MUTE/CANCEL button
until you reach your desired setting then press the SELECT button. The unit
will confirm the new setting by displaying ‘Changed’ twice and will then return
to the Menu.
6. Voice
The Snooper Evolution has a selectable voice alert, which means that if you
have this setting activated your unit will tell you exactly what you are
approaching without you having to take your eyes from the road. This setting
is switched ‘ON’ by default.
To alter the settings for voice alerts use either the MODE/MENU button
(button 1) or the MUTE/CANCEL button (button 2) until your preferred setting
(‘Voice ON’ to switch voice alerts on or ‘Voice OFF’ to switch voice alerts off)
is displayed then press the SELECT button (button 3). The unit will confirm
the new setting by displaying ‘Changed’ twice and will then return to the
Menu.
Features and Settings
Features and Settings
Return to contents
