![Snooper Evolution Plus Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/snooper/evolution-plus/evolution-plus_user-manual_1309515016.webp)
16
6. Mute Button
If during an alert you decide that you would like to mute the audible alert, but
still retain a visual alert simply press the MUTE/CANCEL button briefly. The
screen will continue to display a visual alert but no sound will be emitted.
After you have travelled out of range of the location the unit will automatically
reset so the next time you encounter a location you will receive both an
audible and a visual alert as normal.
7. Alert Pattern
Fixed Speed Safety Cameras
As you approach a fixed speed safety camera the unit will begin to emit a
voice alert or your chosen audible alert (either a Soft or Hard ‘beep’) at your
preset alert distance. As you move closer to the fixed speed safety camera
the ‘beeping’ will quicken. At the same time the display will indicate the type
of location you are approaching, then the speed limit at that location and will
then begin to count down the distance in 50 metre increments to that location.
Automute
When your device alerts you to a location, rather than continually beeping
through the alert, it simply beeps at your selected volume for five seconds
and then automatically mutes the sound to volume level 3 until you are out of
range of the source. This allows you to receive a brief audible alert instead of
a continuous one.
If you would like to change the alert to a visual alert only press the
MUTE/CANCEL button to temporarily turn off the sound. If at any time you
would like to cancel the alert, simply press and hold the MUTE/CANCEL
button for approximately two seconds.
SPECs Safety Camera Systems
Due to the fact that the SPECs system incorporates a series of cameras that
monitor a vehicles speed over a fixed distance, a different alert pattern has
been devised to ensure that your concentration is maintained throughout the
danger zone.
When approaching the first camera in the SPECs system your Snooper
Evolution will begin to alert you at your chosen preset alert distance with the
display indicating ‘SPECs Str’ and emitting either a voice or your chosen
audible alert. The display will then change to indicate the speed limit at this
point and then count down the remaining distance in 50 metre increments to
the location of the camera.
Once you have passed the first camera the unit will then emit an audible alert
and will alternate the display showing ‘SPECs’ and the speed limit every five
seconds to remind you that you are still within the SPECs system.
Whilst travelling within a SPECs series, your Snooper Evolution will provide
both an audible and visual alert 250m before each camera. If after twenty
seconds you do not pass another camera, the alert will automatically ‘Time
Operating Instructions
Operating Instructions
Return to contents