24
12. Speed Unit
This feature allows you to choose which speed measurement method you
prefer either miles per hour (MPH) or kilometres per hour (km/h). The device
is supplied with MPH turned on as the factory default setting.
To adjust the speed measurement type press either the MODE/MENU button
(button 1) or the MUTE/CANCEL button (button2) to select your desired
speed measurement type. Once you have chosen your desired setting press
the SELECT button (button 3). The unit will confirm the new setting by
displaying ‘Changed’ twice and will return to the Menu.
13. Pre-Alert Setting
The pre-alert setting allows you to adjust the distance that your Snooper
Evolution will alert from to a fixed speed safety camera when utilising GPS.
You can set your pre-alert distance in 50 metre increments from 100m to a
maximum of 1000m or alternatively you can select a new feature - ‘Auto
Range’.
Auto-range simply selects the correct alert distance to each camera detected
depending on the speed limit of the road the camera is situated on. The
different alert distances are shown below.
Detection distances for Fixed Cameras and High Risk Zones
Speed Limit
Pre-Alert Distance
20mph
250m
30mph
300m
40mph
350m
50mph
400m
60mph
700m
70mph
700m
Motorcycle Installation
The Snooper Evolution can be installed on to a motorcycle. An ear piece is
available as an optional extra so that audible alerts can be heard.
Instructions for mounting the Evolution are as per the installation guide on
pages 9 to 13. Remember however that the Snooper Evolution is not
waterproof so needs to be mounted within a tank bag or other waterproof
holder. Always remember that in order for your Snooper Evolution to work
effectively the unit needs to be positioned so that the built in GPS antenna
has an unobstructed view of the sky. If you require any further advice please
visit our website
www.snooperneo.co.uk
Motorcycle Installation
Motorcycle Installation
Return to contents
