15
If you would like to exit the Menu screen at any time press and hold the
MODE/MENU button for approximately 2 seconds. If no buttons are pressed for
a period of five seconds the unit will automatically exit the Menu and return to
your chosen standby display.
3. Adjusting the Volume
The Snooper Evolution has an adjustable volume for controlling the loudness of
the audible alert. To increase the volume simply rotate the volume control on the
right hand side of the device, towards you. To decrease the volume of the unit
rotate the volume control away from you.
4. MODE/MENU Button
This button has two functions. The
Mode
function is used to select between three
types of settings,
City, Motorway
or
All
. When the button is pressed and held for
two seconds it allows you access to the Menu for further configuration of your unit.
When selecting your preferred Mode you need to press the ‘SELECT’ button to
confirm the change.
CITY Mode
In CITY mode the Snooper Evolution will ignore any alert generated via GPS that
is actually located on a motorway and is in range of your device but not an
immediate threat to you, as you are not actually travelling on that section of road.
Laser alerts remain unaffected when selecting this mode.
MOTORWAY Mode
In Motorway mode the Snooper Evolution will ignore any alert generated via GPS
that is not actually on a motorway and is within range of your device but not an
immediate threat to you as you are not actually travelling on that section of road. If
your speed drops below 20mph the device will sound an audible alert and the
message ‘Road Ch?’ will be shown on the display to remind you that you may no
longer be travelling on a section of motorway and may need to change the mode
to ‘CITY’ or ‘ALL’. Laser alerts remain unaffected when selecting this mode.
ALL Mode
In ALL mode the Snooper Evolution will detect all alerts generated via GPS that
are within the selected range of the unit. If you were travelling on a section of
motorway for instance it would mean that the unit could alert to locations situated
on an ‘A’ road that are near to the motorway. As it is not on the road you are
travelling however
,
it is not a threat and you might prefer to select the ‘Mway’
setting so that the unit would ignore unwanted alerts located via GPS. Laser
alerts remain unaffected when selecting this mode.
PLEASE NOTE:
Whilst in CITY mode the device will not detect any locations
located on a motorway. When the unit is in Motorway mode the unit will not
detect any locations located on ‘A’ roads so you need to remember to change
modes when leaving an ‘M’ type road.
5. Cancel Button
If during an alert you decide that you would like to cancel it simply press and hold
the MUTE/CANCEL button. The display will automatically return to the Standby
screen and the device will be ready to alert you to the next GPS coordinate or
laser source.
Operating Instructions
Operating Instructions
Return to contents
