13
Caution:
If you must use pliers to loosen the ring, be careful not to crush the
tip. Never use pliers or other tools to retighten the ring on the cigarette lighter
plug.
2. Pull the ring straight out, then remove the metal tip, spring and old fuse.
3. Check the fuse to see if it has blown. If it has, replace it.
4. Replace the metal tip and spring inside the ring, then place the fuse inside
the cigarette lighter plug and screw the ring back onto the plug. Make sure
the metal tip is visible when you reassemble the cigarette lighter plug.
Direct connecting/hard wiring your Evolution
You can power your Snooper Evolution by wiring it directly to your vehicles
12V electrical system using the ‘Hard Wire’ cable supplied as standard with
your unit. First connect the positive side of the cable; this cable has the fuse
holder connected to it, to a 12v switched live. This is a live that is ON when
the ignition is ON but has no power when the ignition key is removed. The
negative side of the cable should be connected to a negative ground. It can
be attached to any metal portion of the vehicles frame. Next plug the small
adaptor on the other end of the lead into the DC 12V input socket on the back
of the unit.
Important: If you are unfamiliar with this procedure, please consult a
professional auto electrician.
Installing the Evolution
Installing the Evolution
Return to contents
