Snapper 7800979-00, Руководство оператора

Страница: 8 / 112

Engine Speed Control
• Move engine
speed control
lever toward Slow
(Turtle) to
decrease engine
speed.
• Move engine
speed control
lever toward Fast
(Rabbit) to
increase engine
speed.
• Move engine
speed control
lever past Fast
(Rabbit) to turn
on choke.
I
Features and Controls
Note: The figures and illustrations in this manual are provided
for reference only and may differ from your specific model.
Contact your dealer if you have questions.
Compare Figure 2 with the table following.
2
Mulching Cover A
Rear Height Adjustment Latch (2) B
Oil Fill Cap and Dipstick C
Rope Start Handle D
Engine Speed Control E
Drive Control F
Blade Control G
Ground Speed Control H
Fuel Filler Cap I
Front Height Adjustment Latch (2) J
Operation
Before Starting
1. Check the guards, deflectors, grass bag, and covers to
make sure all are in place and securely tightened.
2. Check the blade control (A, Figure 3), drive control (B), and
ground speed control (C) to insure they work freely.
3
3. Check the cutting height. Adjust to the desired height. See
Cutting Height Adjustment.
4. Check the engine oil:
• Make sure the mower is on a level surface.
• Clean the oil fill area of any debris.
• Remove the dipstick (A, Figure 4) and wipe with a clean
cloth.
• Insert and tighten the dipstick.
• Remove the dipstick and check the oil level. It should
be at the top of the full indicator (B) on the dipstick.
• If low, add oil slowly into the engine oil fill. See
Oil
Recommendations. Do not overfill. After adding oil,
wait one minute and recheck the oil level.
• Replace and tighten the dipstick.
8 www.snapper.com
Not for
Reproduction