Snapper 6-3172, Инструкции по безопасности, установка и руководство оператора

Страница: 4 / 16

4
SECTION 1 – ASSEMBLY INSTRUCTIONS
INTRODUCTION: The #6-3157 Single Bag Grass Catcher Kit fits Snapper Yard Cruiser YZ145382BVE, Series 2,
models only. This Kit is not intended for use on Series 1 YZ models or any Series of HZ and HZS Yard Cruisers.
Use the following instructions to assemble the grass catcher components and prepare your machine for
collecting grass clippings and leaves. Follow and complete each step carefully.
WARNING
DO NOT attempt any adjustments, maintenance or
service with the engine running. STOP engine.
STOP blade. Engage parking brake. Remove key.
Remove spark plug wire from spark plug and
secure wire away from spark plug. Engine and
components are HOT. Avoid serious burns, allow
all parts to cool before working on machine.
STEP 1
BUMPER BRACKET
A.
Remove the top right bumper bolt and loosen top
right frame bolt. See Figure 1.1.
B. Slide slot in bumper bracket under head of right
frame bolt. Push bracket firmly against rear bumper
and reinstall bumper bolt and tighten both bolts
securely. See Figure 1.2.
FIGURE 1.1
FIGURE 1.2
STEP 2
MUFFLER HEAT SHIELD INSTALLATION
IMPORTANT!
To avoid damage to grass catcher
components, the muffler heat shield must be installed
before operating machine.
A. Loosen bolt on top of muffler heat shield. See
Figure 1.3.
B. Place muffler heat shield under existing heat shield
on muffler and slide slot forward onto bolt.
C. Make sure that the slot is completely forward and
tighten bolt securely.
FIGURE 1.3
LOOSEN
ONLY
REMOVE
BUMPER
BOLT
LOOSEN
ONLY
HEAT SHIELD. SLIDE UNDER
EXISTING HEAT SHIELD.
SLIDE BUMPER
BRACKET UNDER BOLT