Smiths Medical cadd-solis VIP 2120 Скачать руководство пользователя страница 38

Страница: 38 / 44

What if I Drop or Hit the Pump?

What should I do if I drop the pump in water?

If you accidentally drop the pump in water, retrieve it quickly, dry

the pump off with a towel, and contact your health care provider.

What if I drop the pump or hit it against a hard surface?

Immediately do the following:

•

Gently twist and pull on the cassette to make sure it is still

firmly attached.

•

Check the battery door to make sure it is still firmly attached. If

the battery door is removed, simply snap the door onto the bar

that is located on the pump.

•

If the pump is powered on and there are audible or visual

alarms and on-screen help appears on the pump display, follow

the on-screen help (see “Alarms and Messages” on page 39).

If the cassette or battery door are loose or damaged or you cannot

resolve any alarms by following the on-screen help, do not use the

pump. Immediately stop the pump, close your tubing clamp, and

contact your health care provider.

WARNING: If the pump is dropped or hit, inspect it for damage.

Do not use a pump that is damaged or not functioning

properly. Depending on the type of damage, death or serious

injury could result from the use of a damaged pump.

Содержание cadd-solis VIP 2120













































Результаты поиска

Содержание cadd-solis VIP 2120

Отзывы:

Похожие инструкции для cadd-solis VIP 2120

Бренды по названию

Популярные бренды

Smiths Medical cadd-solis VIP 2120, Информационное руководство

Результаты поиска

Содержание cadd-solis VIP 2120

Отзывы:

Похожие инструкции для cadd-solis VIP 2120

Бренды по названию

Популярные бренды